*Intended for moderate to heavy-duty use on commercial pools.
*Constructed of a wood core, fiberglass roving with a flexible outer edge & a tapered design to provide for board's strenght and a fast recovery.
*Extra reinforcement at the fulcrum provides for add atrentgh.
*The Frontier III can be mounted on a wide variety of stands, 2/3M, Deluxe, Econoline, Steel & U frame, depending on site requirements.
*2 9/16" diameter holes are provided on the buttom end, pre drilled 12" apart from mounting. 2 1/2", grade II carriage bolts with hardware are provided to mount the board on the diving stand.
**Depending on installation design,local codes & site requirements, this model is generally suitable for use on commercial pools.
*Laminated wood core: The core is made of laminated wood veneer using exterior adhesives to provide superior strength & resiliency.
*Outer body: is a vacuum formed acrylic skin and is hand-laid with fiberglass & resin roving. The tread has a resin bounded non-slip sanded surface & runs the entire lenght of the board except for an area of approximately 1/2" in from all edges.
|